RAWMOUNT for sandisk + SYNC™ 90-degree cable
- Regular price
- €27,50
- sale price
- €27,50
- Regular price
-
unlock the full potential of your camera sensor. RAWMOUNT integrates your recording media directly into your monitoring workflow.
this is a precision 3d printed mount designed specifically to secure a sandisk extreme (pro) portable ssd to the blackmagic video assist 12g. it allows you to bypass expensive cfast cards and record high-bitrate blackmagic RAW directly from cameras like the sony cinema line or panasonic.
i’m including the SYNC™ 90 degree corner cable in the box—it’s the perfect length to keep the rig tight and the data flowing fast.
i designed RAWMOUNT because i was tired of dangling drives and sketchy connections. this is a custom-designed, 3d-printed mount that integrates your external ssd directly onto the back of your blackmagic video assist. it turns a clumsy "workaround" into a solid, professional recording module. no more gaffer tape, no more loose cables, and no more panic about the drive disconnecting mid-take.
unlock braw on your sony (and others)
if you are shooting with a sony FX3, FX30, or FX6, the only way to get true RAW recording is externally. RAWMOUNT makes this workflow actually usable in the field. by securely mounting the drive to the monitor, you create a compact unit that feels like it belongs on the camera, not something hacky you threw together. it’s the cleanest way to capture high-bitrate blackmagic RAW without dealing with expensive cfast cards.
precision fit + included cable
whether you use sandisk or samsung, the mount is printed to fit the drive perfectly—nice and tight so it doesn’t rattle. i also include my custom SYNC™ 90-degree usb-c 4.0 cable in the box. i chose this specific length and angle so it routes cleanly from the drive to the monitor's port without any excess slack to snag on your other gear. plug it in, and it stays put.
- mounts directly to the blackmagic video assist 12g
- custom 3d printed fit for sandisk or samsung ssds
- includes SYNC™ 90-degree usb-c cable
- enables stable braw recording for sony fx3, fx30, fx6 & other camera models like panasonic.
- zero-rattle design prevents drive disconnections
- eliminates the need for velcro or adhesives
- keeps your camera rig compact and cable-snag free
material
- PETG-CF (carbon fiber) – lightweight, extra tough, with a clean matte finish straight off the printer.
heat resistance
- your ssd will give up long before this mount does
- softening temp: 85 °C
- melting temp: 225 °C
(ssds usually run under 60 °C)
mechanical strength
- tensile strength: ~35 mpa – strong enough to flex, not snap
- impact strength: ~41 kj/m² – handles drops and knocks
- bending strength: 70 mpa – holds shape under pressure
weight
- mount: 8–25 g (depends on model)
- magnet: 13.5 g
fit & size
- the size of the mount is exactly the size of your chosen ssd
- the fit is snug. you might need to gently press to get it secured
included in both options:
- the RAWMOUNT for sandisk + SYNC™ 90-degree cable
- a handwritten note
- a QR code with further instructions
- a little surprise
the ssd and video assist in the picture are (obviously) not included.
i designed RAWMOUNT because i was tired of dangling drives and sketchy connections. this is a custom-designed, 3d-printed mount that integrates your external ssd directly onto the back of your blackmagic video assist. it turns a clumsy "workaround" into a solid, professional recording module. no more gaffer tape, no more loose cables, and no more panic about the drive disconnecting mid-take.
unlock braw on your sony (and others)
if you are shooting with a sony FX3, FX30, or FX6, the only way to get true RAW recording is externally. RAWMOUNT makes this workflow actually usable in the field. by securely mounting the drive to the monitor, you create a compact unit that feels like it belongs on the camera, not something hacky you threw together. it’s the cleanest way to capture high-bitrate blackmagic RAW without dealing with expensive cfast cards.
precision fit + included cable
whether you use sandisk or samsung, the mount is printed to fit the drive perfectly—nice and tight so it doesn’t rattle. i also include my custom SYNC™ 90-degree usb-c 4.0 cable in the box. i chose this specific length and angle so it routes cleanly from the drive to the monitor's port without any excess slack to snag on your other gear. plug it in, and it stays put.
- mounts directly to the blackmagic video assist 12g
- custom 3d printed fit for sandisk or samsung ssds
- includes SYNC™ 90-degree usb-c cable
- enables stable braw recording for sony fx3, fx30, fx6 & other camera models like panasonic.
- zero-rattle design prevents drive disconnections
- eliminates the need for velcro or adhesives
- keeps your camera rig compact and cable-snag free
material
- PETG-CF (carbon fiber) – lightweight, extra tough, with a clean matte finish straight off the printer.
heat resistance
- your ssd will give up long before this mount does
- softening temp: 85 °C
- melting temp: 225 °C
(ssds usually run under 60 °C)
mechanical strength
- tensile strength: ~35 mpa – strong enough to flex, not snap
- impact strength: ~41 kj/m² – handles drops and knocks
- bending strength: 70 mpa – holds shape under pressure
weight
- mount: 8–25 g (depends on model)
- magnet: 13.5 g
fit & size
- the size of the mount is exactly the size of your chosen ssd
- the fit is snug. you might need to gently press to get it secured
included in both options:
- the RAWMOUNT for sandisk + SYNC™ 90-degree cable
- a handwritten note
- a QR code with further instructions
- a little surprise
the ssd and video assist in the picture are (obviously) not included.
i designed RAWMOUNT because i was tired of dangling drives and sketchy connections. this is a custom-designed, 3d-printed mount that integrates your external ssd directly onto the back of your blackmagic video assist. it turns a clumsy "workaround" into a solid, professional recording module. no more gaffer tape, no more loose cables, and no more panic about the drive disconnecting mid-take.
unlock braw on your sony (and others)
if you are shooting with a sony FX3, FX30, or FX6, the only way to get true RAW recording is externally. RAWMOUNT makes this workflow actually usable in the field. by securely mounting the drive to the monitor, you create a compact unit that feels like it belongs on the camera, not something hacky you threw together. it’s the cleanest way to capture high-bitrate blackmagic RAW without dealing with expensive cfast cards.
precision fit + included cable
whether you use sandisk or samsung, the mount is printed to fit the drive perfectly—nice and tight so it doesn’t rattle. i also include my custom SYNC™ 90-degree usb-c 4.0 cable in the box. i chose this specific length and angle so it routes cleanly from the drive to the monitor's port without any excess slack to snag on your other gear. plug it in, and it stays put.
- mounts directly to the blackmagic video assist 12g
- custom 3d printed fit for sandisk or samsung ssds
- includes SYNC™ 90-degree usb-c cable
- enables stable braw recording for sony fx3, fx30, fx6 & other camera models like panasonic.
- zero-rattle design prevents drive disconnections
- eliminates the need for velcro or adhesives
- keeps your camera rig compact and cable-snag free
material
- PETG-CF (carbon fiber) – lightweight, extra tough, with a clean matte finish straight off the printer.
heat resistance
- your ssd will give up long before this mount does
- softening temp: 85 °C
- melting temp: 225 °C
(ssds usually run under 60 °C)
mechanical strength
- tensile strength: ~35 mpa – strong enough to flex, not snap
- impact strength: ~41 kj/m² – handles drops and knocks
- bending strength: 70 mpa – holds shape under pressure
weight
- mount: 8–25 g (depends on model)
- magnet: 13.5 g
fit & size
- the size of the mount is exactly the size of your chosen ssd
- the fit is snug. you might need to gently press to get it secured
included in both options:
- the RAWMOUNT for sandisk + SYNC™ 90-degree cable
- a handwritten note
- a QR code with further instructions
- a little surprise
the ssd and video assist in the picture are (obviously) not included.
i designed RAWMOUNT because i was tired of dangling drives and sketchy connections. this is a custom-designed, 3d-printed mount that integrates your external ssd directly onto the back of your blackmagic video assist. it turns a clumsy "workaround" into a solid, professional recording module. no more gaffer tape, no more loose cables, and no more panic about the drive disconnecting mid-take.
unlock braw on your sony (and others)
if you are shooting with a sony FX3, FX30, or FX6, the only way to get true RAW recording is externally. RAWMOUNT makes this workflow actually usable in the field. by securely mounting the drive to the monitor, you create a compact unit that feels like it belongs on the camera, not something hacky you threw together. it’s the cleanest way to capture high-bitrate blackmagic RAW without dealing with expensive cfast cards.
precision fit + included cable
whether you use sandisk or samsung, the mount is printed to fit the drive perfectly—nice and tight so it doesn’t rattle. i also include my custom SYNC™ 90-degree usb-c 4.0 cable in the box. i chose this specific length and angle so it routes cleanly from the drive to the monitor's port without any excess slack to snag on your other gear. plug it in, and it stays put.
- mounts directly to the blackmagic video assist 12g
- custom 3d printed fit for sandisk or samsung ssds
- includes SYNC™ 90-degree usb-c cable
- enables stable braw recording for sony fx3, fx30, fx6 & other camera models like panasonic.
- zero-rattle design prevents drive disconnections
- eliminates the need for velcro or adhesives
- keeps your camera rig compact and cable-snag free
material
- PETG-CF (carbon fiber) – lightweight, extra tough, with a clean matte finish straight off the printer.
heat resistance
- your ssd will give up long before this mount does
- softening temp: 85 °C
- melting temp: 225 °C
(ssds usually run under 60 °C)
mechanical strength
- tensile strength: ~35 mpa – strong enough to flex, not snap
- impact strength: ~41 kj/m² – handles drops and knocks
- bending strength: 70 mpa – holds shape under pressure
weight
- mount: 8–25 g (depends on model)
- magnet: 13.5 g
fit & size
- the size of the mount is exactly the size of your chosen ssd
- the fit is snug. you might need to gently press to get it secured
included in both options:
- the RAWMOUNT for sandisk + SYNC™ 90-degree cable
- a handwritten note
- a QR code with further instructions
- a little surprise
the ssd and video assist in the picture are (obviously) not included.
shop with confidence
shipping
i ship from my warehouse in the netherlands. most orders go out quickly, but since i’m often working on set, there might be a delay of a day or two during busy times.
since this is a 3d printed product, shipping times may take longer. i need to assemble parts, check quality and re-print if needed. shipping times for 3d prints are 5 business days.
returns
if your item arrives damaged, something’s missing, or there’s a mistake, just reach out. i’ll cover the return and make it right. want the full details? check the return policy.
couldn't load pickup availability
does the magnet mess up your ssd or monitor?
no. the magnet in RAWMOUNT for sandisk + SYNC™ 90-degree cable is strong enough to hold your drive in place, but nowhere near powerful enough to mess with your data or tamper with your monitor.
modern ssds are well protected, and it would take a magnet over 100 times stronger to even have a chance at causing issues. your files are safe. your laptop’s safe. nothing to worry about.
snap it in place
i made these brand-specific mounts to be minimal, snug, and shaped to fit your ssd perfectly. mine’s been stuck to the back of my laptop daily since i printed it.
in the office, on the move, or cramped in a van. it stays put. no unplugging, no dropped drives, no missing media. once you start using it, it just makes sense.
frequently asked questions
these SCREENMOUNTS are made for one specific ssd and nothing else. the fit is tight on purpose to keep your drive safe and steady. that also means other models simply won’t work, so double-check that you’ve got the exact ssd listed.
i wrote the same story 2 times on this page, but for the sake of the faqs, lets do it a 3rd time.
no. the magnet in RAWMOUNT for sandisk + SYNC™ 90-degree cable is strong enough to hold your drive in place, but nowhere near powerful enough to mess with your data.
modern ssds are well protected, and it would take a magnet over 100 times stronger to even have a chance at causing issues. your files are safe. your laptop’s safe. nothing to worry about.
if the mount is made for that type of ssd, than yes.
at the moment i only have space black. but im working on a ring that looks more like the space gray macbooks. sign up for the newsletter to stay informed (in the footer).
definitely. ill give it a proper quality control to ensure it leaves my warehouse clean and working.